Graphite PC-G1 Rubber Bellow Mechanical Seal 10mm -100mm metal bellow seal 

PC-G1 Rubber Bellow Mechanical Seal Bellowsfor all kinds of pumps 

The bellows is not subjected to any torsional stress and its ingenious design incorporates several functions,as seal face carrier,several functions,as seal face carrier ,secondary sealing element and drive collar.The seal face is driven through the spring and"L"-rings.There are no bonded joints and all the face materials are no bonded joints and all the face materials are inter-changeble without having  to modify any dimensions.highly recommended for duties with media containing silidseg.in waste water and sewage application.

Combination of materials

·         Sealing face:Graphite,Silicon carbide,Tungsten carbide,Aluminum oxide

·         Bellows:FPM,EPDM,NBR.

·         Metal component:Stainless steel304,316L.

PC-G1

Mechanical seals of the G1 series are amongst the most commonly used. The bellows is not subjected to any torsional stress and its ingenious design incorporates several functions,as seal face carrier, secondary sealing element and drivecollar. The seal face is driven through the spring and L-RINGS. There are no bonded joints and all the face materials are interchangeable without having to modify any dimensions. Highly recommended for duties with media containing solids eg. In wasted water and sewage applications.

PC-G12/G13

Dimensions,items and designations the same as for G1, but with an extended bellows tail to achieve the fitting length accoording EN12756 in combination with seat G6 or G60.

Our products can replace the mechanical seals produced by Burgmann and John Crane and be widely used in petroleum, chemistry, refinery, paper making, pharmacy, power and auto industry. Our Mechanical Seal Factory. is the advanced designer & manufacturer of mechanical seal, the range involves in: industrial pump mechanical seal, mixer and agitator seal, cartridge seal, metal bellows seal, auto cooling pump seal and auto air-condition compressor lip seal.